background image

26  |  www.BabyLock.com

Tension Quick Start 

Guide

Bobbin adjustments are minute, like 
ticks of a clock.

1.  Always adjust the bobbin tension 

first.

2.  Stitch to check top tension.
3.   If thread looks like Diagram A 

Problem: 

The top thread is too 

tight.

 Solution:

 Turn the top 

tension dial counter-clockwise to 
loosen the top tension.

4.   If thread looks like Diagram B 

Problem

: The top thread is too 

loose. 

Solution

: Turn the top 

tension dial clockwise to tighten 
the top tension.

Threading the Machine 

Baby Lock recommends that selecting and using only high-quality threads for your 
quilts.

To thread the machine

1.  Place thread cone onto spool post

 

 on the thread tray, insert the thread through 

the thread-mast eyelet

 

 

from back to front, sliding the thread into the guide

 

.

2.  Continue to the three-hole thread guide 

Thread each of the three holes from 

back to front, wrapping the threads on the guide, being careful not to cross the 
threads. Threading the three holes is recommended for most threads. However, 
some very delicate threads or metallic threads may require less tension, using only 
one or two holes. If you experiencing thread breaks, try threading only one or two 
holes on the thread guide.

3.  The thread continues down to thread guide 

 just above the top tension and then 

on to the top tension assembly 

.

 

Â

IMPORTANT

: The thread must be flossed between the two tension discs. If the 

thread is not firmly in place between the two tension discs, the thread will lay on 
top of the tension discs (no tension) and thread looping on the bottom of the 
quilt can occur.

Summary of Contents for BLRG20ST

































































Reviews: