Regalia Stationary User Manual | 49
3. Touch the
Record
button. The bobbin
capacity value will reset to zero. Quilt until
the bobbin runs out.
NOTE
: The Reset Bobbin button on the
Main Screen shows the bobbin level while
quilting. When the
Reset Bobbin
button is
selected, it shows the estimated capacity of
the full bobbin. This number counts down
while stitching. While recording the bobbin
capacity of a bobbin, the number increases
while quilting until it runs out of thread.
4. Return to the low-bobbin alarm screen
and press the
Record
button again to stop
recording. The number that appears in the
Bobbin Capacity box is an estimate of how
much thread is on the bobbin.
5. It is best to estimate how much bobbin
thread will be used for tie-offs and
decrease the bobbin capacity by that much.
Press the
Minus
(–) button to decrease the
capacity, or touch the
Bobbin Capacity
box
to pop-up an onscreen number pad and
enter the number directly.
6. When you are ready to use a full bobbin
with that type of thread, insert the full
bobbin and press the
Reset Bobbin
button
on the Main screen
7. Make sure the alarm icon is enabled (gold).
If not, touch the
Alarm
icon to toggle it on.
When the bobbin level reaches zero, the
low-bobbin alarm will sound.
NOTE
: If the low-bobbin alarm is turned on and off on this screen, it is also
turned on or off on the Alarms screen.