background image

Regalia Stationary User Manual  | 25

 

Â

IMPORTANT

: Before adjusting your top tension remember to floss the top thread 

between the tension discs or it will float outside the discs providing little or no 
top tension. This could cause significant tension or thread nesting problems.

 

“

QUILTING TIP: 

Test the tension settings before quilting. The best way to make 

sure the top and bottom tension settings are balanced is to test the stitching 
using a fabric scrap. Keep 4-inch squares of light solid fabric on hand to place at 
the side of the quilt on the extra batting and backing. Then stitch loops, swirls, 
and straight lines. Look at the stitches on top and underneath to ensure the 
tension looks good. Fine-tune the tension as needed.

To adjust the top tension

1.  Test stitching with a fabric scrap placed on the extra batting and 

backing at the side of the quilt.

2.  Adjust the tension by turning the tension 

dial clockwise to tighten and counter-
clockwise to loosen. The tension value 
appears on the touch screen. The value 
changes as you turn the tension dial.

3.  Continue to test the stitching on the 

fabric scrap and adjust the tension until 
the stitches are ideal for the project.

 

Summary of Contents for BLRG20ST

































































Reviews: