ENGL
ISH
DE
UTS
CH
FRANÇAI
S
NEDER
LAND
S
Problem
Check
Action
The battery is not
charging.
Is there a red light blinking on the
side of the charger?
Do the LED lights on the COP2
indicate an error code?
If a red light is flashing on the side
of the charger, disconnect the COP2
from the battery and see if the
flashing stops. If not, the problem is
in the charger. If the flashing does
stop, there is an issue with the COP2
or the battery pack. Reconnect the
COP2, the charger, and the battery
pack and check whether an error
code appears on the COP2 using the
table in this manual.
Is the charger light on?
If the light is not on, the charger is
defective.
If there is no error LED flashing either
on the charger or the COP2, is the
power plug firmly connected? Is the
charging plug firmly inserted into the
COP2 and the COP2 firmly inserted
into the battery pack?
Are the battery charger, COP2, or
battery pack contact terminals dirty
or wet?
Reconnect everything and see if the
battery is now charging in another
socket.
Contact your dealer if the battery is
still not charging.
The battery charger emits
abnormal noises, foul
odours, or smoke.
Unplug the charger plug and immediately cease operation.
Have an authorised dealer inspect your Babboe-E cargo bike.
The battery charger
becomes hot.
It is normal for the battery charger to
become warm during charging.
If the battery charger is too hot to be
touched with your hand, unplug the
charger plug, wait for it to cool, and
then consult an authorised dealer.
8.2 battery pack and charger
75
74
