Cleaning Device d-800 Page 20
equipment and facility engineering
With the jet gun, positioned at the front of the machine, you can dry objects or spray guns. If you
unclamp the compressed-air quick connect, you can substitute the jet gun by the cleaned spray gun
and exhaust it in the exhaust opening.
Working with the automatic side of the machine (cf. pages 4f)
Open the hinged door. The exhaust system starts automatically. Then install the gun as described
below:
1.
Remove the lid of spray gun and place it in the lid holder. Make certain that the paint-soiled
inner surface faces downwards → towards the interior of the washer.
2.
Place the spray gun, with the cup, on the center nozzle upside down with the paint channel.
If a strainer is used in the spray gun, then the cup needs to be unscrewed. Place the cup
upside down on the cup holder (receptacle next to the center nozzle.) Remove the screen
filter from the spray gun, and place on one of the tines of the cover holder. Next, place the
spray gun upside down on the center nozzle.
3.
The spray gun trigger is pulled back with the trigger clamp located in the washing chamber.
This ensures that solvent flows through the paint channel of the spray gun. In addition, it is
necessary to ensure that the set screw is in "opened"-position so that the air flow is possible.
4.
Connect black compressed air hose to the connection on the spray gun.
This ensures that air is forced into the air channels of the spray gun during the cleaning
process and that solvent and paint residues are prevented from entering.
5.
Close the hinged door from the gun-cleaner. Do not allow the doors or hatches on
the machine to fall shut. All machine doors and hatches must be operated with
appropriate care and caution by the user.
Do not open the door while automatic washing cycle is running. If necessary, turn
the timer to "0".
6.
Set timer for 2-3 minutes. The main cleaning cycle is activated. Solvent is drawn from the 60
liters drum and circulates. The timer can be reset to zero by hand. When the set time is over,
open the hinged door slowly and check the cleaning result.
