Cleaning Device d-800 Page 1
equipment and facility engineering
1. Important Information
We thank you for your trust you gave to us by buying the spraying-gun cleaning-device "d-800". On
the identification plate at your cleaner you can find the exact type designation and serial-number of
your cleaner to ensure an uncomplicated service and shipment of spare parts.
The B-TEC cleaners have been designed and manufactured to the highest quality standards for high
operational safety. Due to certain operation processes, there are places and parts that can´t be
protected without impairing operability and functionality. Therefore we ask you to read this
document carefully before using the cleaner in order to achieve maximum operational safety and
lifetime. The instructions are an integral part of the product and must be stored with the gun cleaner.
Read this document carefully before putting the gun cleaner into operation and keep
it for future reference!
On the last page of this instruction book, there is a form for documenting safety inspections, which
have to be conducted at regular intervals. The form has only to be filled out by qualified Person
(persons with sufficient knowledge and experience or manufacture´s mechanics) or experts (e.g.
engineers or Technical Control Board experts).
Safety inspections must be conducted before commissioning and at least once a
year!
The B-TEC devices and machines are only allowed to be used according to the intended purpose
explicitly described below. A usage not according to the intended purpose as well as unauthorized
modifications exclude the liability of the manufacturer for any damages resulting from this.
The B-TEC devices and machines are only to be used according to the intended
purpose explicitly described below!
These machines are to be used for cleaning varnish and spray paint guns as well as paint soiled parts
and hand tools using solvents (A I, A II, A III) or non-combustible, aqueous cleaners for water-based
paints. The Acetone content of the solvent used must be less than 65 %.
These gun cleaners must not be subjected continuous operation, such as, for instance, the serial
production. Improper use of the washers can endanger the health of the operator and of others and
cause damage to the cleaner itself or to other materials and assets.
Improper use of the cleaners can endanger the health of the operator!
