6
User Manual v2.0
MAG
NOTE: All B METERS srl software packages are available on the USB flash drive key that accompanies
the product.
The software can also be downloaded from the website www.bmeters.com by accessing the
Download Area. A free registration will be required after which you can download the configuration
software for your product.
1.3 PRELIMINARY NOTES
Main parts of the electromagnetic flowmeter are:
»
Sensor
– installed in the tube with the use of flanges and other joints;
»
Converter
– can be installed on the sensor (in compact version) or remotely (in remote version) connected
with two pipes.
Electromagnetic flowmeters have many important advantages compared to their mechanical counterparts,
such as: exceptional long-term stability, maximum process reliability and zero maintenance. As a result,
these sensors can provide accurate and reliable long-term measurements.
See the following paragraphs for more detailed information on correct installation.
NOTES:
Electromagnetic flowmeters are designed specifically to operate under the following basic
conditions:
1. The liquid must be conductive
2. The tube must always be completely full
3. The input and output distances must be on recommended settings
4. The grounding instructions must be followed
1.4 PRODUCT IDENTIFICATION
Each
MAG
Converter manufactured by B METERS has a STANDARD identification plate (vedi Fig. 1), that
displays the following information:
STANDARD PLATE (CONVERTER)
»
CE conformity mark.
»
MODEL
: Converter model.
»
IP
: Converter protection class.
»
S/N
: Serial number which identifies the device.
»
TEMP
: Minimum/maximum temperature of
the
working conditions.
»
POWER S.
: Power supply or battery voltage.
»
Hz
: Power supply frequency.
»
COUPLING
: Serial number which identifies the
sensor connected to the converter.
»
OPTIONAL
: Other modules can be added.
» : This symbol means that the product must b
e
disposed of according to the legal requirements.
Fig. 1 | STANDARD Identification Plate (CONVERTER)
