5
MAG
User Manual v2.0
1. INTRODUCTION
IMPORTANT WARNING! It is very important that all personnel working with the equipment have
read and understood the instructions and indications provided in this manual, and that they follow
them prior to using the equipment itself. The manufacturer assumes no responsibility for the
consequences resulting from improper use by the worker.
The suitability of the device for particular purposes shall be worker’s responsibility.
The warranty will be considered void in case of improper installation and use of devices (systems).
• The manufacturer shall bear no responsibility for any damage caused by improper use, improper
installation or tampering of own products. Installation, connection, commissioning and maintenance
must be carried out by personnel who are qualified and authorized for this purpose. The personnel in
charge of the installation must make sure that the measurement system is properly connected as per
the wiring diagram indicated in this document.
• The manufacturer shall bear no responsibility for any damages or injuries resulting from any
misunderstanding of this manual. In order to avoid possible accidents to persons or things caused
by incorrect interpretation of the instructions, the user must not proceed with operations and/or
interventions on the converter if there are uncertainties or doubts regarding the operation(s) to be
performed. We recommend contacting Assistance Service for clarifications in this regard for more
precise instructions.
•
The manufacturer will be held responsible only if the converter will be used in its original configuration.
For applications that require high working pressures or use of substances that may be dangerous for
people, the environment, equipment or anything else: In case of pipe breakage, B METERS srl recommends
to take the necessary precautions such as adequate positioning, protection or installation of a guard or
safety valve, before installing the CONVERTER in the COMPACT version.
The device contains live electrical components, therefore installation, checks and maintenance must be
carried out by experienced and qualified personnel who are aware of all necessary precautions to be taken.
Before opening any internal part, please disconnect the power supply.
1.1 MANUFACTURER’S STATEMENT
»
Stresses and loads possibly caused by earthquakes, strong winds, fire damage, vibrations and
natural
disasters were not taken into account in the phase of machine designing.
» Do not install the machine in such a way that it acts as a focus for stresses on the pipes. External loads
were not taken into account in the device configuration.
» While the device is working, the pressure, supply voltage and/or temperature values indicated on the label
or in this Operating Manual must not be exceeded.
1.2 PACKAGING VERIFICATION
At the moment of purchase and/or upon receipt of the product, the buyer is strongly advised to check the
quality of the packaging which must be intact, without visible dents and completely and correctly closed.
When opening the packaging, also check that the product complies with the information on the packing list
in terms of completeness of components/accessories.
