Mod.BM43
COM
Vers.1.0
16/11/2005
Page 45 of
95
B.M. Tecnologie Industriali
Via Praimbole 13
35010 LIMENA (PD)
VAT No. IT02459940280
Tel. +39 (0) 49 884.16.51
Fax +39 (0) 49 884.16.54
E-Mail [email protected]
Web www.bmtecnologie.it
Digit
and the device will display
M 2 6
S a v e P a r a m e t e r s
S e l e c t a r o o m
b y E N T U P D N
This windows allows the user to save the configuration. It is possible to save up to 18
configurations (from 0 to 17).
Digit
and the device will display
M 2 7
L o a d P a r a m e t e r s
S e l e c t a r o o m
b y E N T U P D N
This window is used to upload one of the 18 saved configurations. Press ENT and then use
the arrow keys to scroll among the configurations. Press ENT to select the desired one.
Digit
and the device will display
M 2 8
H o l d i n g P o o r S i g n a l
Y E S
This window is used to set up the device in order to maintain the last reading as valid in
case of temporary loss of signal. If NO is selected, output signal could be modified.
Digit
and the device will display
M 2 9
E m p t y P i p e S e t u p
0
This window is used to set up a min threshold. Below that threshold the device considers
the pipe as empty. Set up a value among 30 and 40 in order to be sure the device does
not measure when the pipe is empty.
