Mod.BM43
COM
Vers.1.0
16/11/2005
Page 66 of
95
B.M. Tecnologie Industriali
Via Praimbole 13
35010 LIMENA (PD)
VAT No. IT02459940280
Tel. +39 (0) 49 884.16.51
Fax +39 (0) 49 884.16.54
E-Mail [email protected]
Web www.bmtecnologie.it
5.
COMMUNICATION WITH A PC AND/ OR DATA LOGGING
This chapter informs the user about the hardware connections to be done to allow a
communication between the device and the pc.
5.1 REQUIRED HARDWARE
It is possible to connect a notebook to the device by using the serial port RS232-C: in this
way it will be possible to download data or send signals to the TTFM100 series.
Use a serial cable with a female DB9 connector on both sides. It is possible to buy the
cable in almost every electronic shops, it is a very common cable.
If you want, you could also made it by yourselves, please follow the instructions:
9 POLES FEMALE
9 POLE FEMALE
CONNECTOR
CONNECTOR
5.2
COMPLETE PIN-OUT OF DB9 M DOOR
PIN CONNECTION TO…
1
Battery charger Positive pole input (+)
2
RXD- Received data
3
TXD- Sent data
4
Not Used
5
GND- Back signals
6
OCT Output- Positive Pole output (+)
7
Not Used
8
Battery charger Negative pole input (-)
9
RING input for MODEM connection
