Mod.BM43
COM
Vers.1.0
16/11/2005
Page 39 of
95
B.M. Tecnologie Industriali
Via Praimbole 13
35010 LIMENA (PD)
VAT No. IT02459940280
Tel. +39 (0) 49 884.16.51
Fax +39 (0) 49 884.16.54
E-Mail [email protected]
Web www.bmtecnologie.it
3.9 INITIAL SETTING MENU ANALYSIS
Digit
and the device will display
M 1 0
O u t e r P e r i m e t e r
1 2 8 6 m m
This window is used to set up the pipe’s perimeter, if known or measurable.
Digit
and the device will display
M 1 1
O u t e r D i a m e t e r
4 0 9 . 3 4 7 m m
This window is used to set up the external pipe’s diameter. When the pipe’s external
perimeter diameter is set up, the external pip’s diameter is automatically setup too.
Digit
and the device will display
M 1 2
W a l l T h i c k n e s s
6 . 5 m m
This window is used to set up the pipe’s thickness. It is also possible to pass over this
menu and go to the menu M13, used to set up the internal pipe’s diameter.
Digit
and the device will display
M 1 3
I n n e r D i a m e t e r
3 9 6 , 3 4 7 m m
This window is used to set up the net pipe’s internal diameter.
Digit
and the device will display
M 1 4
P i p e M a t e r i a l
0 . C a r b o n S t e e l
This window is used to set up the pipe’s material.
Press ENTER to activate the material selection.
Use the arrow keys to scroll among the list:
