Sefram
CHAPITRE 7. SYSTEM
ò
The configuration shown below is an example. If you have any doubts about your settings, please
contact your IT department.
In a point-to-point connection, you can send SCPI commands using the supplied programming
manual. This means you can edit and run your own script over an isolated connection.
7.5
|
User level
Several user levels can be defined, giving access to more or less advanced functions and information. The aim is
to simplify the user interface as required:
Figure 7.6: User level
7.5.1
Viewer level:
The device is virtually read-only. The user can only start or stop recording. He/she cannot modify any configuration
(network, channels, trigger...) and has no access to the file manager.
For example, this mode is used when an operator has access to the device, but the configuration
has been made by a third party. This limits the risk of tampering.
Normal level:
The interface functions available are those intended for standard use. The user has access to virtually all functions.
DAS
User manual
61