Sefram
CHAPITRE 3. GETTING STARTED
There are also 3 others power supply outputs (3.3V, 5V, 12V, 24V) on the rear pannel (5W maximum) :
3.5.3
Alarm outputs
To set the parameters for the 4 alarm outputs, please refer to the section on alarms setting.
3.6
|
Recording measurements
3.6.1
Recording file configuration
Recording file configuration is available from the menu
Configuration > Records > File info
File name
The file name is a string of characters. All alphanumeric characters are allowed, with the exception of the following
characters: " / | \ * : ? < >.
The file extension is .mf4 and is not configurable. It corresponds to the MDF4 (Measurement Data Format)
recording format, standard ASAM (Association for Standardization of Measuring Systems).
Date suffix
If the box is checked, the file name will be automatically followed by the date and time of the start of recording
(pressing the "Start recording" button, independently of any triggers) in the following format: _yy-MM-dd_HH_mm_ss_zzz,
:
• yy
Last 2 figures of the year
• MM
issue of the month
• dd
day of the month
• HH
hours in 24h format
• mm
minutes
• ss
seconds
• zzz
milliseconds
For example, if the filename is set to "RecordFile" and the "Suffix by date" box is checked, we could have a file
called: RecordFile_23-01-28_15_02_28_792.mf4 corresponding to a record from 28/01/2023 at 15:02:28.792.
ò
Caution: If the "Suffix by date" function is deactivated, you must manually change the file name for
each recording,
otherwise the last recording will systematically overwrite the previous one
and you will lose your data
. We strongly recommend that you keep this function enabled to avoid
any loss of recordings.
DAS
User manual
27