Sefram
CHAPITRE 7. SYSTEM
To configure the network, click on "Configure"
(2)
, and the following page will appear :
F
IGURE
7.3 : Enp2s0 Interface
If your network is directly connected to a DHCP server via a router, you need to check DHCP mode
(1)
. Your
network will automatically assign an available network address to your device, thus avoiding address conflicts.
In some cases, if the user does not have access to the corporate network, a point-to-point connection is re-
quired. This is an isolated connection between the PC and the device. In this case, set the network parameters
manually
(2).
Example of manual point-to-point network settings :
First, set up a fixed IP on your PC by following the steps below :
DAS
User manual
59