Sefram
CHAPITRE 3. GETTING STARTED
a digital filter (software processing). Alternatively, apply a hardware filter (signal input processing) from a choice of
100Hz, 1000Hz or 10,000Hz.
By pressing the icon shown below, you can duplicate all the parameters of the selected channel to
other channels on the device.
F
IGURE
3.7 : Copying parameters from an analog channel
3.5
|
Digital channels setting
Digital channels are accessible via the device’s 25-pin D-Sub connector. To access digital channel settings, press
Configuration > Channels > Digital.
The optional digital channel cable accessory allows all digital channels to be wired using standard
banana plugs, giving you greater convenience when wiring your equipment.
F
IGURE
3.8 : Digital channels table
On this page, you’ll find a table showing all logic inputs. Each channel is shown as a row
(1)
. The position column
defines the corresponding pin on the physical connector. The complete connector schematic with associated pins
is shown on the right-hand pane of the screen to guide your wiring
(2)
. It consists of :
DAS
User manual
25