Initial commissioning
Section 2 – Operating Instructions
Rev. 2.8 Date 2019-02-04
Software version 1.00
CCS
Chapter 4
Page 4-1
4.
Initial commissioning
Detailed familiarisation and instruction of the customer staff takes place at this point.
4.1
Language selection
First of all, the display language set must be checked and changed if necessary. The menu guide and
display messages can be provided in German, English, French, Spanish and Dutch.
For this purpose, the system must be switched on using the main switch (1) and the language selected
accordingly under the sub-menu “0” “Language”. The menu is quit again by pressing the “Esc” key.
4.2
System parameters
Then the set system parameters must be adapted to local conditions and logged.
Figure 4-1:
Switch cabinet drilling pattern
NOTE
The system may only be commissioned by trained and skilled personnel or by a trained
representative authorized by B. Braun.
When handling liquid haemodialysis concentrates, it is mandatory to refer to the
manufacturer's safety provisions!
CAUTION
Incorrect commissioning of the system can lead to damage to the system and personal
injury.
