B. Braun Aesculap DSM Instructions For Use/Technical Description Download Page 9

Page: 9 / 26

USA

3.3.2

Cart LED indicators

There are three LED indicators near the base of the cart that display the
status of the DSM, system computer (EPU), and robotic arm components.
The indicator colors are explained below.

3.3.3

Cart connections

Fig. 5

On the touchscreen arm, there are the following connections:

■

2 × USB 3.0 ports

At the back of the cart, there are the following connections:

■

2 × Ethernet ports

■

2 × HDMI output ports

■

2 × USB 2.0 ports

At the front of the cart, there are the following connections:

■

2 × Ethernet ports

■

1 × HDMI output port

■

1 × HDMI input port

■

1 × SDI input port

■

Main power cord connection

■

6 mm potential equalization port

Connecting a secondary display (output)

The system can support simultaneously displaying the live view on multi-
ple displays.

The following 3D displays are approved for use with the DSM:

►

Connect the display to the HDMI output port

at the back of the cart,

see Fig. 5.

►

Configure the additional displays in the DSM software “Display” set-
tings panel, see Chapter 6.8.7.

The individual display settings are specially configured at the factory.
When the PV644 or PV015 display is used in a high-temperature environ-
ment, the brightness of the display backlight is reduced to lower the tem-
perature inside the unit. When this function is activated, the power indi-
cator flashes in amber. It is not recommended to drape the displays.

Connecting a video stream from another device (input)

Video streams from other devices may be connected to facilitate display in
conjunction with the 3D image from the DSM head.

The following devices are approved for providing video input:

►

Connect the device to the HDMI input port

or SDI input port

at the

front of the cart, see Fig. 5.

►

Configure the video input in the DSM software “Input Source” settings
panel, see Chapter 6.8.8.

Connecting to a potential equalization system

Directly above the main power cord connection

, the DSM system is

equipped with a 6 mm potential equalization port

that can be connected

to the healthcare facility potential equalization system.

►

Connect the display to the potential equalization port

at the front of

the cart, see Fig. 5.

Connecting to a PACS/RIS server

There are two Ethernet ports on the both the front and back panels of the
cart.

►

Ensure that the Ethernet cable and connector comply with at least Cat-
5e EIA/TIA-568A-5, preferably Class D values from ISO/IEC 11801:2002
or EN 50173-I:2002.

►

Connect an Ethernet cable to one of the Ethernet ports

to link

the system with the facility PACS server, see Fig. 5.

►

Configure the connection in the software DICOM settings. See
TA015615-DCS for the complete DICOM Conformance Statement.

3.4

3D display

The default 26” 3D display has a circularly-polarized, micro-polarizing fil-
ter that displays the right and left image alternately. Circularly-polarized
glasses are worn to ensure that the left eye only sees the left image and
the right eye only sees the right image. The 3D display has a refresh rate
of 60 frames per second (FPS) simultaneously for each eye. The display
comes optimally pre-configured from the factory.

►

If the display settings are causing inadequate visualization, please con-
tact customer support for assistance.

3.5

3D display stand (optional)

The system can support remote 3D displays on a display stand approved by
Aesculap. If the default 26” 3D display does not come with the system, an
optional display can be the primary display.

The following display stands are approved for use with the DSM:

Indicator

Description

Solid green

The component is ready for use.

Solid yellow

A minor error has occurred.

Solid red

Warning – the component is not ready for use.

Art. no.

Designation

PV008