B. Braun Aesculap DSM, Instructions For Use/Technical Description

Page: 5 / 26

3
USA
7.2 Preparation before cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
7.3 Limitations on reuse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
7.4 Cleaning/disinfection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
7.4.1 Product-specific safety instructions for the reprocessing
procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
7.5 Wipe disinfection for electrical devices . . . . . . . . . . . . . . . . . . . 21
7.6 Inspection, maintenance and checks . . . . . . . . . . . . . . . . . . . . . 21
7.7 Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
7.8 Storage and transport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
8. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
9. Troubleshooting list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
9.1 Malfunctions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
9.2 Error messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
9.2.1 Startup errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
9.2.2 License error . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
9.2.3 Recording errors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
9.2.4 DSM head errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
10. Technical Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
11. Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
11.1 Performance data, information about standards . . . . . . . . . . . 23
11.2 Ambient conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
12. Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
13. Distributor in the US/Contact in Canada for product
information and complaints . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
1. General information
1.1 Symbols on product and packaging
1.2 Applicable to
These instructions for use are applicable to the following products:
1.3 Warnings
Warnings make clear the dangers to patient, user and/or product that
could arise during the use of the product. Warnings are labeled as follows:
1.4 Intended use
This device is for use with patients undergoing microsurgery within its
indications for use.
There is no patient contact intended with this device.
Symbol Location Description
Base of cart Main power switch.
Press to turn the system ON.
Press again to turn the system OFF
Product label AC input
DSM head DC input
Product label Warning
Product label Risk of electric shock! Do not open.
Robotic arm Take care to avoid injury when in the
vicinity of the display arm or robotic
arm.
Support arms Do not exceed load ratings for support
arms.
Product label Follow instructions for use.
Cart emer-
gency stop Emergency stop control device
Product label System mass
Product label Manufacturer
Product label Date of manufacture
Product label CSA NRTL Mark
Product label CE marking acc. to DIR 93/42/EEC
Touchscreen
mount label USB 3.0 port
Coupler label Yaw adjustment slider
Cart potential
equalization
conductor Connection point for potential equal-
ization conductor
Product label Marking of electric and electronic
devices according to directive
2002/96/EC (WEEE), see Chapter 12.
Product label Catalog number
Product label Serial number
Product label Revision
Art. no. Designation
PV010 Aesculap DSM (Digital Surgical Microscope)
PV022 Software module DUV 400
PV024 Software module DICOM
PV030 White balance card
DANGER
Danger of death or serious injury.
WARNING
Danger of minor injury or product damage.
CAUTION
Indicates a possible threat of material damage. If
not avoided, the product may be damaged.
Symbol Location Description