IMediaChassis Series
25
ELECTROSTATIC DISCHARGE PRECAUTIONS
Electrostatic discharge (ESD) can cause damage to any product, add-in
modules or stand-alone units, containing electronic components. Always
observe the following precautions when installing or handling these kinds
of products:
Do not remove unit from its protective packaging until ready to install.
Wear an ESD wrist grounding strap before handling any module or
component. If the wrist strap is not available, maintain grounded contact
with the system unit throughout any procedure requiring ESD protection.
Hold the units by the edges; do not touch the electronic components or
gold connectors.
After removal, always place the boards on a grounded, static-free
surface, ESD pad or in a proper ESD bag. Do not slide the modules or
stand-alone units over any surface.
WARNING!
Integrated circuits and fiber optic components
are extremely susceptible to electrostatic discharge
damage. Do not handle these components directly unless
you are a qualified service technician and use tools and
techniques that conform to accepted industry practices.
UL/CUL: Listed to Safety of Information Technology Equipment, including
Electrical Business Equipment.
CE: The products described herein comply with the Council Directive on
Electromagnetic Compatibility (2004/108/EC) and the Council Directive on
Electrical Equipment Designed for use within Certain Voltage Limits
(2006/95/EC). Certified to Safety of Information Technology Equipment, Including
Electrical Business Equipment. For further details, contact B&B Electronics.
