IMediaChassis Series
4
SNMP MANAGEMENT MODULE LEDS
The SNMP Management Module features several LEDs. The LED functions are:
LNK/ACT
FDX/COL
TEMP
PS
FAN A / FAN B
Glows green when a link is established on
port. Blinks green when data activity occurs.
Glows yellow when port is in Full-duplex
mode. Blinks yellow when port is operating in
Half-duplex mode and collisions occur.
Glows yellow when temperature of unit
surpasses a user-defined level.
Glows yellow when one module malfunctions.
Glows yellow when a fan malfunctions.
Installing the iMediaChassis/20
Install the chassis first before installing any modules into an iMediaChassis.
When installing the chassis, be sure to observe the following precautions to
prevent electrical or mechanical damage:
1. Protect the chassis from exposure to sunlight and electrical or magnetic
fields.
2. Ensure that the equipment rack remains stable, even with the addition of the
chassis and its associated cabling.
To install 20 -slot Rackmount chassis:
1. Have four #10 screws and four clip nuts available (hardware may vary
depending on rack type). The rest of the hardware is supplied with the unit.
2. Locate a suitable location in the rack for installation and secure the clip-nuts
onto the mounting rails. Use screws to attach the chassis to the rack.
3. Plug the chassis into a reliable, filtered power source.
4. Elevated Operating Ambient - If installed in a closed or multi-unit rack
assembly, the operating ambient temperature of the rack environment may
