![background image](http://html.mh-extra.com/html/b-b-sensors/logbox-rht/logbox-rht_instruction-manual_460597007.webp)
INSTRUCTION MANUAL
LogBox RHT
Temperature and Humidity Data Logger
Technical changes reserved
B+B Thermo-Technik GmbH | Heinrich-Hertz-Str. 4 | D-78166 Donaueschingen
0141 0315-14 07.06.2016
Fon +49 771 83160 | Fax +49 771 831650 | [email protected] | bb-sensors.com
7 / 18
7.2.
Running LogChart_II
When you open Logchart-II the following main window is displayed
Next, select the serial port that the communication interface will use in the “
Port
” menu.
If using the serial port check which serial is available. Usually COM2 is free, once the mouse uses COM1. In the case of
Ir-
Link3/USB
choose
USB port.
The chosen port will be chosen by default next times the LogChart II is initiated. When a valid port is
selected, the icons below are highlighted.
7.3.
Configuring the logger
Make sure the communication interface is connected to the PC port selected. The interface must be constantly directed towards the
communication window on front part of the logger at a maximum distance of 0.5 m.
The logger must be first “woken up” by pressing once the
Start/Stop (S)
button on its front side.
After
the
serial port is selected, click the
Displays the configuration
setup dialog box
Stops any running
measurements
Press this button to download the
actual contents of the logger’s
memory
Press to view online the 10 last
logged values
Logger
Interface