INSTRUCTION MANUAL
LogBox RHT
Temperature and Humidity Data Logger
Technical changes reserved
B+B Thermo-Technik GmbH | Heinrich-Hertz-Str. 4 | D-78166 Donaueschingen
0141 0315-14 07.06.2016
Fon +49 771 83160 | Fax +49 771 831650 | [email protected] | bb-sensors.com
6 / 18
7.1.
Drivers and software installation
In the
Ir-Link3/RS232
model there is a RSR232/Ir communication interface. It must
be connected to the serial port at the PC.
In the
Ir-Link3/USB
model there is a USB/Ir communication interface, which must
be connected to the available USB port. Windows will request the proper driver
installation, which is found in the CD-ROM that is provided with the logger.
The driver installation steps may vary according to the machine, even for the same
version of an operating system. The following screenshots and steps are only to
provide guidance.
1.
Insert the CD shipped with the logger in the CD-ROM drive.
2.
Connect the communication interface IrLink-3 to the PC USB port.
Windows® will acknowledge the presence of new hardware and a few
seconds later it will start the driver installation process.
3.
The “found new hardware wizard” will be displayed, and you will be asked
if you want to install the driver from the Windows Update website. Select
“No, not this time”,
and then click Next.
4.
Select “Install from a list or specific location (Advanced)” and click “Next”.
5.
Select “Search for the best driver in these locations” and
check
“Search
removable media”. Click “Next”. If installation files are not in a CD, check
“Include this location in the search” and show the file path.
6.
If a prompt warns you that it does not support Windows® XP or that
signature verification failed, click “
Continue anyway
”.
7.
The interface driver files will be copied to the computer and after a few
seconds a screen is displayed informing you that the software installation
has been concluded. Click “Finish”.
8.
In some situations, the steps described above may be repeated again.
Follow the same procedures.
In later uses of the interface, Windows® may require the driver installation again. In
this case, the same installation wizard will be displayed, and you will have to select
the option “Install software automatically (recommended), as the driver may already
be in the computer.
Logchart-II
Software installation:
Insert the supplied CD-ROM in the CD-drive of the PCs/Laptop.
The software installation wizard will start automatically. If it does not, please run the
LC_II_Setup.exe
program
provided
from
your CD drive. To do so please follow the steps below:
From the start menu of Windows run Windows Explorer. Choose the CD drive
Double click on the icon
LC_II_Setup.exe
to run the setup
program.
Follow the steps described in the Setup wizard
