B+B Sensors LogBox RHT, Instruction Manual

Page: 10 / 18

INSTRUCTION MANUAL
LogBox RHT
Temperature and Humidity Data Logger
Technical changes reserved
B+B Thermo-Technik GmbH | Heinrich-Hertz-Str. 4 | D-78166 Donaueschingen
0141 0315-14 07.06.2016
Fon +49 771 83160 | Fax +49 771 831650 | info@bb-sensors.com | bb-sensors.com 10 / 18
8.
DATATRANSFER AND VISUALISATION
Data collected are sent from logger to PC. Data can be collected any time, at the end of the acquisition process or while they are
being acquired. If data collection takes place during the acquisition process, the process will not be interrupted.
8.1.
Offloading data
Data offload is accomplished by clicking the button Offload Data :
During data transfer, a status bar indicates remaining data to be transferred. Data offloading time is proportional to the number of
readings logged (40 Seconds for 16 000 values).
8.2.
Visualizing data
At the end of values transfer, data are automatically displayed in a graphical form.
8.3.
Chart view
It is possible to select a region of the chart to zoom in. Zoom commands can be accessed through the View menu or through zoom
icons from the task bar.
It is also possible to select an area from the chart to zoom in by clicking and dragging the mouse, thus creating a zoom region
starting from the upper left corner on the chart area.
The graphic curves can be vertically dragged with a right-click and dragging the mouse up and down
8.4.
Sheet view
To display measurements in a tabular form, press the icon Table View :
Values are presented in a tabular form, listing the measurement time and value.