INSTRUCTION MANUAL
LogBox RHT
Temperature and Humidity Data Logger
Technical changes reserved
B+B Thermo-Technik GmbH | Heinrich-Hertz-Str. 4 | D-78166 Donaueschingen
0141 0315-14 07.06.2016
Fon +49 771 83160 | Fax +49 771 831650 | [email protected] | bb-sensors.com
13 / 18
Base
in the PDA data base.
9.2.
Configuring the Logger- Settings
During configuration, the logger and the PDA ports must be aligned. Press
Settings
in the
Monitoring
screen. The screen
Settings
is opened and provides the required parameters for configuring the logger.
The parameters to be defined are:
Title
:
Name of the process.
Input
:
Enables the user to select the temperature unit.
Start
(start of acquisitions): Defines the measurement start mode. Options are:
Immediately
:
The logger starts logging as soon as configuration is sent to the logger.
date/time
:
Start in defined data and time, always after current time. It is possible to perform daily repetitions. If this option
is selected, a new box to define the stop logging time is displayed.
<Start> Button
:
Press the
Start_Now
button from the
Monitoring
screen to start logging. The PDA must be turned towards the
logger.
Set point value
:
Measurements start when a temperature set point is reached. With this option it is also possible to start
measurements above (
log Above
) or below (
log Below
) a temperature set point (channel 1). This option is not
valid for alarms that have already been set up.
TagTemp button
: Starts when the
Start/Stop
button at the frontal side of the logger is pressed.
Stop
:
Defines the measurements stop mode: Options are:
Full memory
:
Loggings can be stored
up to
the logger full memory capacity is reached.
Wrap around
:
Logging never stops. When the logger maximum memory capacity is reached, oldest records are overwritten
by newest data.
