INSTRUCTION MANUAL
LogBox RHT
Temperature and Humidity Data Logger
Technical changes reserved
B+B Thermo-Technik GmbH | Heinrich-Hertz-Str. 4 | D-78166 Donaueschingen
0141 0315-14 07.06.2016
Fon +49 771 83160 | Fax +49 771 831650 | [email protected] | bb-sensors.com
16 / 18
9.5.
Transferring the data to the desktop
HotSync of data stored in a PDA with the Desktop is performed through a conduit installed together with the LogChart Palm-OS. The
conduit converts the data collected by the LogChart Palm-OS to a file compatible with the LogChart-II software.
To access the conduit options, the HotSync Manager software must be active. Click on the HotSync Manager in the Windows
taskbar. Select in the drop-down menu the option Custom. Select Novus LogChart Conduit and click Change. The following window
will be exhibited:
Handheld overwrites Desktop
: LogChart Palm-OS
files are transferred to the Desktop.
Save in
:
Choose a directory to record files generated during data synchronization.
Leave Data on Palm
:
Option to keep or delete the data in the PDA after HotSync.
Do nothing
:
Data synchronization will not be performed;
Set as default
:
The same settings will be used in the next
HotSync
10.
MOST FREQUENTLY FOUND PROBLEMS
The LED is not flashing:
The LED flashing light is intentionally weak, and it can be difficult to see in clear environments. Be sure it
is really not flashing
Communication with the logger fails:
Make sure the COM port is correctly selected and there is no other programs using the same port during the
communication attempts.
Make sure there is no physical obstacle blocking the IR signal.
Make sure the cable is well connected to the PC.
Make sure the port selected does not present any problem.
11.
MAINTENANCE
The housing can be cleaned with a wet cloth. Do not use chemical solvents. With the exception of exchanging empty batteries the
logger is widely maintenance free
