B+B Sensors LogBox RHT, Instruction Manual

Page: 4 / 18

INSTRUCTION MANUAL
LogBox RHT
Temperature and Humidity Data Logger
Technical changes reserved
B+B Thermo-Technik GmbH | Heinrich-Hertz-Str. 4 | D-78166 Donaueschingen
0141 0315-14 07.06.2016
Fon +49 771 83160 | Fax +49 771 831650 | info@bb-sensors.com | bb-sensors.com 4 / 18
3.
SECURITY ADVICE
The B+B Thermo-Technik GmbH assumes no liability for damages occurred through failure to observe these security advices. A
usage non conform to the instructions given in this manual can damage the device
Body and property damages

The use of the measurement system must be restricted to qualified personal.

The system is not adequate for use in atmosphere with explosion danger.

Do not use the system in a high electric or magnetic field area
.
Ensuring of product security

The system must be operated only within the limits given in the technical Data

Exposing the system to hot temperatures (higher than the operating temperature) will cause damages in the electronic circuits
and also damage the housing.
4.
WASTE AND DISPOSAL ADVICE
Please return the device to B+B Thermo-Technik GmbH after expiration of its lifetime
5.
USAGE ACCORDING TO PURPOSE
Please use the product only for the purposes for which it is conceived. In case of doubt, please first contact B+B Thermo-Technik
GmbH
6.
PRODUCT DESCRIPTION
LogBox RHT is a small portable electronic temperature and humidity logger. Its internal sensor measures local environment
temperature humidity and logs the values in an electronic memory. Logged data, or ACQUISITIONS, can be later viewed and
analyzed on a PC where they can be opened in tabular and graph forms.
The logger is supplied with
Logchart-II software, which enables to set up the logger operation mode. It is also used for viewing
acquisitions. Other parameters such as end of measurements, logging interval, etc., are easily defined through the LogChart-II software.
Acquisitions can also be exported to be analyzed in other applications, such as spreadsheet programs.
6.1.
Supply voltage
The Temperature and humidity Data logger LogBox RHT is a highly autonomic measurement device. It is supplied with a built-in 3.6
V lithium battery (CR2032).
6.2.
Unpacking
The following items must be included in the package:

The electronic logger LogBox RHT;

A CD-ROM with the Logchart-II software and a USB driver;

Quick logger operation guide.

The present operating instructions

Optional : a communication interface (upon request)