IP 200 User Manual
Page 56 of 72
IGMP Proxy:
This is the global setting for IGMP Proxy. If it is enabled, then the
enabled IGMP Proxy on WAN PVCs will be working. Otherwise, no WAN PVC can
have IGMP Proxy working on it. System default is Disabled.
PPP Half Bridge:
Not applicable for router application.
PPP reconnect on WAN access:
If enabled, the PPP session will automatically
establish a connection when a packet tries to access the WAN. System default is
Disabled.
Connect PPP when ADSL link is up:
Not applicable for router application.
Apply:
Applies the settings you did on this page.
Reset:
Restores all setting in this page to default.
Save Settings:
Click this link to go to the
Save Settings / Reboot
page. On the
Save
Settings / Reboot
page, click
Save & Reboot
to permanently save the settings to
system flash memory and to reinitialize the system to the new settings.
Admin Username/Password Configuration
This page allows you to set the password for administrator.
Figure 33
Admin Username/Password Configuration page
The Admin password is same as the FTP password, so it must have at least 8-
characters for the FTP to work. The Admin password can be up to 65 characters
(excluding ‘&’).
Reset to Default
Allows you to restore all your settings to factory default by clicking
Restore
.
