IP 200 User Manual
Page 62 of 72
1.
To initiate a transfer, press the
Trans
soft key during an active call.
This places the first call on hold and you will hear a dial tone.
2.
Dial the second person’s telephone number. When the second
person answers, hand up if you make Blind Transfer or you can
have a private conversation with the second person without the
first person hearing it if you make Attended Transfer.
To Make a Conference Call
1.
To initiate a conference call, press the
conf
soft key during an
active call.
2.
The first call is placed on hold, and you will hear a dial tone. Dial
the second person’s telephone number.
3.
To start the conference call, press the
Hold
, all three parties will be
participating in a conference call.
To Park a call
1. To initiate Call Park, press the
Park
soft key during an active call,
this places the call on hold, and you will hear the phone assign
you a number (up to 3 digitals).
2. You will retrieve the call from another phone or from the same
phone by dialing the assigned number.
It will not work if the phone placing the call on Park has a busy
diversion (you must hear a busy signal to retrieve the call).
Consultation Hold
1. To initiate a Consultation Hold, press
C.Hold
soft key during an
active call;
2. The first call is placed on hold, and you will hear a dial tone. Dial
the second person’s telephone number.
3. When the second party is connected, press
Hold
to toggle
between speaking to first party and second party.
