IP 200 User Manual
Page 26 of 72
Service Provider:
Press “
Add New Provider
” to add new SIP server, the maximum of
which is up to 4.
Registrar Address:
SIP Server’s IP address or Domain name provided by VoIP service
provider (ITSP) or IP-PBX registrar address.
Proxy Address
: IP address or Domain name of proxy.
OutboundProxy Address
: IP address or Domain name of Outbound Proxy, or Media
Gateway, or Session Border Controller.
User Profile:
Press “
Add New User
” to add new user, the maximum of which is up to
4.
Auth User ID:
SIP service subscriber’s Authenticate ID used for authentication.
Usually has the form of digit similar to phone number or actually a phone number.
User Name:
SIP service subscriber’s Authenticate user name used for caller ID
display.
Password:
SIP service subscriber’s account password for IP200 to register to (SIP)
servers of ITSP.
NAT Traversal Technique:
NONE
: If the IP phone directly connected to the Modem, please select this.
USE STUN
---- Server:
Enter the IP address or Domain Name of the STUN Server. The
default is 66.7.238.210. This field is applicable only if USE STUN is selected as the
NAT traversal technique.
----STUN Port:
Enter the port number on which the STUN server listens for
requests from the STUN Client on ATA. The range is 1 to 65535. The default is
3478. This field is applicable only if USE STUN is selected as the NAT traversal
technique.
----Force Keep Alive:
Only valid when STUN is not used. If STUN is not enabled,
and keep alive is still expected to be sent then select
Yes
otherwise select
No
.
----Keep Alive Period:
The keep alive interval in seconds to be used when STUN
is not enabled.
Step4.
Click
Finish
to save the configuration. Please wait about 30
seconds for the process to complete.
Figure 4
Saving Configuration page
Quick setting
: Auth User ID, User Name and Password can be input the digit ‘0’
directly so that the IP200 will auto-register to IP-PBX or ITSP.
