User Manual
Page 15 of 43
Joining an Existing Secured HomePlug AV Network
To enable a new device to join an existing network, Simple Connect will copy the Private
Network Name of the existing network to the new HomePlug AV. You only have to pair the
new Homeplug AV device to any of the devices within the existing Homeplug AV Network by
pressing the Simple connect. If you pressed Simple Connect from multiple HomePlug AVs,
only the signal from the first two devices will be processed.
To join an existing Secured HomePlug AV network using Simple
Connect:
Step 1
Plug HomePlug AV Z beside one of your existing HomePlug AV device. It is important to
assure that you can easily observe the LED behavior of the Homeplugs.
Upon connection, HomePlug Z’s LEDs will blink simultaneously and then the Power LED lights
ON steadily. Ethernet LED will be ON if there is an ethernet link.