User Manual
Page 6 of 43
D
EVICE
D
ESIGN
Item Name
Description
A
Light Sensor
Side Panel
B
Lens
Lens with IR reflection coating
C
IR Light LED
For night vision
D
Reset Button
Press and hold for over 1 second to reset factory default
E
Simple Connect
Button
Press 1 to 3 seconds to enter into “
Pairing Procedure” (creating
an encrypted PLC network)
.
While it’s under “
Pairing Procedure
”, press and hold for 2 to 3
seconds to stop the procedure.
Press and hold for 10 seconds to remove current encrypted
network and generate a new one.
F
PLC Act/Link
LED
OFF:
No PLC device is detected nor connected.
ON: PLC device is detected.
Blinking:
1.
Fast
: PLC UDP data transfer rate is higher than 60Mbps.
2.
Normal
: PLC UDP data transfer rate is between 10Mbps to
60Mbps.
3.
Slow
: PLC UDP data transfer rate is slower than 10Mbps.
G
Power LED
ON: Power on and ready
Blinking:
1.
During “
Pairing Procedure” (creating an encrypted PLC
network)
. The device is creating or being joined into the
same encrypted network and will last 2 minutes until it is been
succeeded or canceled.
OFF: Power off.
