To set up your Mesh System;
1.
Position your mesh node near the existing AIR-706P router and plug the
power adapter to the mains.
2.
Press and hold the WPS button of the existing AIR-706P until the LED
starts to blink.
3.
Press and hold the WPS button of the mesh node until the LED starts to
blink.
4.
Wait for 2 minutes for the blinking to stop.
5.
After 20 to 30 seconds, AON LED at the node turns GREEN.
6.
After another 10 seconds, the AON LED of the controller turned GREEN
7.
When the AON LED on both the controller and mesh node is GREEN
pairing and link is successful and up.
8.
The whole pairing process takes up to 4 minutes.
NOTE:
1.
If you do not see the
Mesh Controller
status on your main router’s Web User
Interface, it means that your mesh pairing is unsuccessful.
2.
Any changes in the configuration will result to your 2.4 GHz SSID to follow your
Mesh Network SSID.
