4.
Define the
IPv4 Mask Length
5.
Define the
6rd Prefix with Prefix Length
6.
Define the
Border Relay IPv4 Address
7.
Click
Apply/Save
8.
Tick the
Enable
checkbox
9.
Click
Apply/Save
To remove a IP Tunneling entry;
1.
Tick the Remove checkbox of the entry you wish to remove
2.
Click
Remove
15. WPS Feature
AIR-706P supports WPS (Wi-Fi Protected Setup) which is a wireless security standard
that allows your devices to connect to a wireless network. You may connect your
devices to your AIR-706P via WPS by pressing the WPS button of your router.
To connect via WPS;
1.
Press and release the WPS button on your AIR-706P
2.
Press the WPS button of your device
3.
WPS pairing takes less than 20 seconds for the pairing to complete
NOTE: Not all devices support WPS. To use this feature, ensure that your device
supports WPS.
