Azkoyen t3 hopper, Manual

Page: 14 / 48

14
07 - 2009
3.2.5 Locating the reloading and exit areas of the coins
Reloading area.
The reloading area of the coins is the total surface area of the upper part of
the T3 hopper. This way, integrating the hopper within the machine is more flexible for the
location of the coin channels.
Exit of coins.
For a better controlled exiting of the coins, the size of the payout window is
reduced. It has been designed so that the coins slide out horizontally and reach the exterior in a
stabilised way, facilitating the transport of the coin towards the refund slot on the machine.
Figure 6: Location of the entry and exit of coins
3.2.6 Ergonomic for the user
Extraction points.
The T3 hopper is designed to facilitate the extraction of the unit from its
base plate. There are two windows near the location of the main connector on the front and
back part (depending on the configuration of the connector) to insert one’s fingers and pull on
the unit.
Figure 7: Front extraction point and usage
Points of transport.
To facilitate the transport of the T3, there are different points by where the
Reloading area
Coin exit