41
07 - 2009
10
11
5
With a flat head screwdriver pull apart the coin detection assembly to access the
screw below, as shown in the figure.
6
Unscrew the screws marked with the arrow, and turn over the unit to access the
electronic board.
7
Unscrew the screw wich fixes the electronic board to the plastic assembly.
8
Release the clips located on the sides.
9
Pull apart the assembly as shown in the figure.
10
Flip upside down to pull appart the track gears and track.
11
Parts to be replaced when a change in the coin configuration is needed.
12
Substitute the track, the coin concentrator and the coin agitator for the new
configuration and assemble in the reverse order.
Summary of Contents for t3 hopper
Page 40: ...40 07 2009 6 7 8 9...
