9
07 - 2009
Table 2: Configuration of the type of coin
iii. Address configuration by ccTalk commands
Address Change [251] and
Address Random [250]
.
8)
In T3 models using two coins, the coins combination must be configured as by the
Table 4.
Tabla 4: coins combinations for double coin models
9)
In parallel models, configure the working mode by means of the dipswitches,
depending on the logic used: positive, negative or pulse mode.
10)
If it is considered necessary, adjust the position of the coin level sensors to adapt to
the needs of the system. There are two holes for the empty detection sensors and
four for the full detection sensors (Figure 3).
Summary of Contents for t3 hopper
Page 40: ...40 07 2009 6 7 8 9...
