9
Chapter 2. Installation, Wiring
Mounting on a DIN Rail
(1) Pull down the sub-base’s DIN rail clamps.
(2) Attach the sub-base to the DIN rail, making sure that the sub-base is not
upside-down.
(3) Push up the DIN rail clamp to fasten the sub-base to the DIN rail.
Pull down the DIN rail clamps
Push the DIN rail clamps
upward to fix in place
Attach sub-base to DIN rail
Mounting in a panel
(1) Cut two M4 threaded holes in the panel.
Unit: mm
62.5
M4
(2 locations)
(2) Use screws to mount the sub-base in the panel.
(Maximum tightening torque: 1.2 N·m)
