SECTION 1-WARNINGS
•
Read user manual carefully before installation.
•
Cut off power (line, UPS or battery) and wait at least 10 minutes before if you have to open
device cover.
•
Connect earth (PE) terminal before power on.
•
Do not connect or disconnect a terminal when the device power is on.
•
Release minimum air gap on installation. Minimum distances for up and down sides are 100 mm;
minimum distances for right and left sides are 50 mm as mentioned in Figure 1.1. Otherwise
there may be not enough air circulation.
•
Do not mount device to wet, hot, cold, dusty or chemical vapor area.
•
Do not install device the area can affect from sunlight directly.
Figure 1.1 Preferred Space Distance for Installation
F/7.5.5.02.95 R:1
1
AE-LIFT
