Axpert MKS III User Manual Download Page 6

Page: 6 / 64

INSTALLATION

Unpacking and Inspection

Before installation, please inspect the unit. Be sure that nothing inside the package is damaged. You should
have received the following items inside of package:

Inverter unit Software CD Manual Communication cable

Preparation

Before connecting all wirings, please take off bottom cover by removing two screws as shown below.

Mounting the Unit

Consider the following points before selecting where to install:



Do not mount the inverter on flammable construction materials.



Mount on a solid surface



Install this inverter at eye level in order to allow the LCD display to

be read at all times.



The ambient temperature should be between 0°C and 55°C to

ensure optimal operation.



The recommended installation position is to be adhered to the wall

vertically.



Be sure to keep other objects and surfaces as shown in the right

diagram to guarantee sufficient heat dissipation and to have
enough space for removing wires.

SUITABLE FOR MOUNTING ON CONCRETE OR OTHER
NON-COMBUSTIBLE SURFACE ONLY.

Summary of Contents for MKS III

































































Search results

Summary of Contents for MKS III

Reviews:

Related manuals for MKS III

Brands by name

Popular brands

Axpert MKS III, User Manual

Search results

Summary of Contents for MKS III

Reviews:

Related manuals for MKS III

Brands by name

Popular brands