16
AXOR Industries
Service Manual
Magnum400
TM
ver.2 rel.05/'15
2.1 General Advices
During the transport of the drive respect the following indications:
• the transport must be made by qualified personnel;
• avoid shocks;
• the temperature range must be between -25°C and +55°C;
• the max. humidity must be 95% (without condensation);
• The converters contains elements which are sensitive to electrostatic discharges. These elements
can be damaged by careless manipulation.
Discharge static electricity from your body before touching the converter.
Avoid contact with material that insulates well (synthetic fibres, films of plastic material and so
forth).
• we suggest to check the motor condition at its arrival to survey eventual damages.
Transport
The unused drives must be storage in an environment having the following characteristics:
• temperature from -25°C to +55°C;
• max. relative humidity 95% (without condensation);
• max. time with the drive powered off (without supply connections):
drive having a power supply ≥ 220VAC
1 year
drive having a power supply ≤ 145VAC (200VDC)
2 years
After this time, before enable the drive, it is necessary activate the capacitors following this procedure:
remove all electrical connections, then supply the input terminals of the supply with the main voltage
(three phase or single phase) for 30 minutes.
In details:
- for the drive having a power supply equal to 380VAC: power it by using a single phase (or three
phase) supply equal to 220VAC;
- for the drive having a power supply equal to 220VAC: power it by using a single phase (or three
phase) supply equal to 110÷130VAC.
In order to avoid this procedure, we suggest to power on the drive with its rated voltage for 30 minutes,
before the max. time is reached.
storage
The drives does not need maintenance.
Otherwise:
• if the casing is dirty: clean it with isopropanol or similar;
• if the drive is dirty: the cleaning is reserved to the producer;
• if the fans are dirty: clean them by using a dry brush.
maintenance
The disposal should be carried out by a certified company.
disposal
