Axminster CT-90H, Manual

Page: 13 / 28

Assembly
13
Fig 32
7. Hook the bag onto the steel hooks around the
extractor housing to temporary hold the bag in place,
see fig 33.
8. Locate the retaining belt, rap the belt around the bag
making sure the belt is positioned on top foam seal band
then latch it down to hold and to seal the bag against the
extractor, see fig 34-35.
Fig 33-34-35
Shaker Paddle Operating Handle
1. Locate the shaker paddle (9-23), insert the handle
mounting over the paddle drive shaft making sure the
clamping bolt is positioned over the machined face then
tighten the bolt using the supplied spanner to secure the
handle, see fig 36-37-38.
Fig 36-37-38
Inlet Manifold (CT-90HB Extractor Only)
Locate the inlet manifold (18) and the small Phillips screw
(27h). Insert the manifold over the extractors inlet and
line up the threaded hole in the inlet with cutout slot in
the manifold, see fig 39. Secure the manifold in place with
the Phillips screw, see fig 40.
Fig 39-40
5
19
Fig 31
Bag hook
9
23
18
27h