V 2 0 0 2 1 3 E N
S e i t e
15 | 27
3.2.3
Mounting
The installation location for the battery system and the inverter have been determined .
Recommended mounting:
1.
Install the wall bracket of the inverter.
2.
Hook the inverter into its bracket.
3.
Unscrew the cover of the connection area.
4.
If not already done, remove the cover from the
battery system housing:
Unscrew 2 screws (hexagon socket, SW4) on the
front underside.
Remove the cover from the base.
Position the base of the battery housing at the intended installation location (and screw it on if
necessary).
3.3
Assembly
3.3.1
Installing AXIstorage Li SH - Energypack einbauen
Safety Instructions
CAUTION
Risk of crushing due to improper installation.
Falling or improper insertion of the module can cause slight bruising and
abrasions to hands and feet.
Wear protective clothing.
Screws M5 (SW4)
