Axis P1445-LE-3 User Manual Download Page 7

Page: 7 / 65

AXIS P1445-LE-3 License Plate Verifier Kit

Get started

2. Select the image rotation that corresponds to how your camera is mounted.

3. Select the number of areas of interest. Note that one area can detect plates in both directions.

4. Select the region where the camera is located.

5. Select capture type.

License plate crop

saves only the license plate.

Vehicle crop

saves the entire captured vehicle.

Frame downsized 480x270

saves the entire image and reduces the resolution to 480x270.

Full frame

saves the entire image at full resolution.

6. Drag the anchor points to adjust the area of interest. See

Adjust the area of interest on page 10

7. Adjust the direction of the area of interest. Click the arrow and rotate to set the direction. The direction determines how

the application registers vehicles entering or exiting the area.

8. Click

Next

9. In the

Protocol

drop-down list, select one of the following protocols:

TCP

HTTP POST

10. In the

Server URL

field, type the server address and port in the following format:

127.0.0.1:8080

11. In the

Device ID

field, type the name of the device or leave as is.

12. Under

Event types

, select one or more of the following options:

New

means the first detection of a license plate.

Update

is either a correction of a character on a previously detected license plate, or when a a direction is

detected as the plate moves and is tracked across the image.

Lost

is the last tracked event of the license plate before it exits the image. It also contains the direction of

the license plate.

13. To turn on the feature, select

Send event data to server

14. To reduce bandwidth when using HTTP POST, you can select

Do not to send images through HTTP POST

15. Click

Next

16. If you already have a list of registered plates, choose to import as either a

blocklist

allowlist

17. Click

Finish

Access control

Use the setup wizard for quick and easy configuration. You can choose to

Skip

to leave the guide at any time.

1. Select

Access control

and click

Next

2. Select the type of access control to use:

Internal I/O

if you want keep list management in the camera. See

Open a barrier for known vehicles using the

camera's I/O on page 18

Controller

if you want to connect a Door controller. See

Connect to a door controller on page 20

Summary of Contents for P1445-LE-3


































































Search results

Summary of Contents for P1445-LE-3

Reviews:

Related manuals for P1445-LE-3

Brands by name

Popular brands

Axis P1445-LE-3, User Manual

Search results

Summary of Contents for P1445-LE-3

Reviews:

Related manuals for P1445-LE-3

Brands by name

Popular brands