AXIS P1445-LE-3 License Plate Verifier Kit
Get started
1. Go to the device’s webpage.
2. Go to
Settings > Apps
.
3. Click
Add
to upload the application file (.eap) to the camera.
To activate the license, you need a license key that is generated by the license code and the Axis device serial number. If you
don’t have a license key on the computer, do the following:
1. Go to
2. Go to
License key registration
.
3. Enter the license code and the serial number.
4. Save the license key file on the computer. Browse to select the file and then click
Activate
.
Adjust the area of interest
Note
If you move the area of interest more than 60º or if you place it outside the live view, it will automatically jump back to
default position. Make sure the region of interest stays in position after you have saved the settings.
1. Go to
Settings
.
2. Click
Edit area of interest
.
3. To improve verification and captured images, go to
Zoom
and adjust the slider to your needs.
4. To have the camera automatically focus on the vehicles, click
Autofocus
. To set the focus manually, go to
Focus
and
adjust it with the slider.
5. To adjust the area of interest, click anywhere in the area and drag the anchor points highlighted in blue.
6. To get the correct direction feedback in the
Event log
, turn the arrow to the driving direction. Click outside the area of
interest, and then click the arrow and rotate to set the direction. The direction feedback shows up in the
Direction
column.
Note that one area can detect plates in both directions
•
To add a second of interest, select
2
in the
Area of interest
drop-down menu.
10
