Axis P1445-LE-3 User Manual Download Page 27

Page: 27 / 65

AXIS P1445-LE-3 License Plate Verifier Kit

The device interface

Note

Support for the features and settings described in this section varies between devices.

Show or hide the main menu.

Access the product help.

Change the language.

Set light theme or dark theme.

See information about the user who is logged in.

The context menu contains:

•

Analytics data

: Accept to share non-personal browser data.

•

Feedback

: Share any feedback to help us improve your user experience.

•

Legal

: View information about cookies and licenses.

•

About

: View device information, including firmware version and serial number.

Status

NTP sync

Shows NTP synchronization information, including if the device is in sync with an NTP server and the time remaining until
the next sync.

NTP settings

: Click to go to the Date and time page where you can change the NTP settings.

Device info

Shows device information, including firmware version and serial number.

Upgrade firmware

: Click to go to the Maintenance page where you can do a firmware upgrade.

RAM use

: Percentage of RAM that’s used.

CPU use

: Percentage of CPU that’s used.

GPU use

: Percentage of GPU that’s used.

GPU bus use

: Percentage of GPU bus that’s used.

Decoding process

: Current status of the decoding process,

Running

Stopped

IP address

: The device’s IP address.

Date and time

: The device’s date and time.

Summary of Contents for P1445-LE-3


































































Search results

Summary of Contents for P1445-LE-3

Reviews:

Related manuals for P1445-LE-3

Brands by name

Popular brands

Axis P1445-LE-3, User Manual

Search results

Summary of Contents for P1445-LE-3

Reviews:

Related manuals for P1445-LE-3

Brands by name

Popular brands