Axis P1445-LE-3 User Manual Download Page 24 | Manualshive

Page: 24 / 65

background image

AXIS P1445-LE-3 License Plate Verifier Kit

Integration

Send images of license plates to a server

With this feature you can push images of the license plates to a server through FTP.

Before you start:

•

The camera must be physically installed and connected to the network.

•

AXIS License Plate Verifier must up and running on the camera.

1. Go to

Integration

>

Push events

.

2. In the

Protocol

drop-down list, select

FTP

3. In the

Server URL

field, type the server address in the following format:

ftp://10.21.65.77/LPR

4. In the

Device ID

field, type the name of the device. A folder with this name will be created for the images. Images are

created using the following format: timestamp_area of interest_direction_carID_license plate text_country.jpg

5. Type the username and password for the FTP server.

6. Select the path and name modifiers for the filenames.

7. Click

Done

.

8. Under

Event types

, select one or more of the following options:

-

New

means the first detection of a license plate.

-

Update

is either a correction of a character on a previously detected license plate, or when a a direction is

detected as the plate moves and is tracked across the image.

-

Lost

is the last tracked event of the license plate before it exits the image. It also contains the direction of

the license plate.

Note

Direction is only included in the filename when

Lost

or

Update

is selected

9. To turn on the feature, select

Send event data to server

.

10. Click

Save

.

Note

Note that the image varies depending on what type of capture mode you have selected, see

Adjust the image capture

settings on page 11

Note

If push events fail, the app will resend up to the first 100 failed events to the server.
When using FTP in push events to a Windows server, do not use %c for naming of images that gives you date and time.
This is due to the fact that Windows does not accept the naming set by the function %c for date and time. Note that
this is not an issue when using a Linux server.

Direct integration with 2N

This example describes direct integration with a 2N IP device

Set up an account in your 2N device:

1. Go to 2N IP Verso

2. Go to

Services

>

HTTP API

>

Account 1

.

24

«
...
22
23
24
25
26
...
»

Summary of Contents for P1445-LE-3


































































Reviews:

No comments

Related manuals for P1445-LE-3

Brand: ABATEC Pages: 8

Brand: FAAC Pages: 12

Brand: GE Pages: 8

Brand: IBM Pages: 12

Brand: K&K Pages: 10

Brand: B meters Pages: 2

Brand: Baccara Pages: 16

Brand: Gardena Pages: 17

Brand: SAFI Pages: 18

Brand: Badger Meter Pages: 2

Brand: Badger Meter Pages: 48

BadgerTouch HREBT

Brand: Badger Meter Pages: 12

Brand: Badger Meter Pages: 16

Brand: Lattice Semiconductor Pages: 2

Brand: Lathem Pages: 4

Brand: tams elektronik Pages: 36

Brand: Pando Pages: 43

Brand: RadioMaster Pages: 49

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands