42
USER MANUAL
__________________________________________________________________________________________________________________
To leave the function with clearing the adding register choose
tot oFF
option.
When connected to a printer, the balance prints the communicate informing
about clearing the register.
The sample check for each measurement (depends on the settings of
functions):
Report printout sample:
Attention:
Maximum number of measurements 99 999.
Maximum total load 99 999 000d.
The weighing unit of the aggregated value from the register (total) is the same as
the weighing unit stated on the keypad or is 1000 times greater (signalised with
“o” indicator at the left of the display).
If the registered value is too big to be displayed, “E” communicate appears on
the display.
If the number of series is too high to be displayed, “Err1”communicate appears
on the display.
DATE: ...
TIME: ...
NETTO: mass
____________________________
TOTAL =
NUMBER OF MEAS. =
AVERAGE VALUE =
