18
USER MANUAL
__________________________________________________________________________________________________________________
15. Special functions
All scales, beside basic metrological functions like weighing and taring, are
equipped with set of special functions.
Basic set includes the following special functions:
- activation of functions in menu (
ACtIV
),
-
autozeroing (
AutotAr
),
-
pieces counting (
PCS
),
-
change of mass unit (
UnIt
),
-
percent calculations (
PErCEnt
),
-
preparing recipes (
rECIPE
),
-
calibration with external weight /internal calibration options (
CALIbr
),
-
label choosing option (LAbEL),- setting parameters of serial interface (
Port-1
),
-
printout configuration (
),
-
animal weighting function (LOC),
-
memorizing tare function (tArE),
-
maximum value indication function (UP),
-
Force measuring function (nEWton),
-
Anty-disturbance filter option (FILtEr),
-
Setting backlight function (b_LIGHt),
-
Function for choosing reading unit (rESOLUt),
-
Statistical calculations function (StAt),
-
Basis weight of paper counting function (PAPEr),
-
charging accumulators settings (
bAttErY
) – accumulator option only,
-
display backlight settings (
b-LIGht
),
-
automatic switching off the scale (
Auto OFF
) – accumulator option only,
-
Total weight function (totAL),
- Date and time setting (dAtE),
- Function of comparing with preset threshold values (trESh).
- restore manufacture settings (
dEFAULt
).
Other functions can be enabled to user as an option on order (all special functions
are described in separate document).
When
MENU
key is pressed start-up menu is displayed. Functions are displayed
in sequence:
PCS, AutotAr
, etc.
User can change menu content switching off or on available
special functions using
ACtIV
function.
When special functions are being switched
MODE
indicator is shown.
