10
USER MANUAL
__________________________________________________________________________________________________________________
8. Preparing scale to work
1.
Take the scale and feeder out of
the package.
2.
Place the scale on a stable
ground not affected by mechanical
vibrations and airflows.
3.
Level the scale using rotating
legs
6
so that the air bubble in
water level
7
at the back of the
scale is in the middle.
4.
Put draft shield
8
on the scale
and cover
9
on it.
Scale should be transported in the way, that there is no risk of
accidental pressing or overweighing a pan.
If the scale was taken from a lower temperature surrounding to a room
with higher temperature, e.g. in winter, moisture can liquefy on the
scale casing. Do not connect power supply to the scale, because this
can cause damage or improper work of the scale. In this case leave the
scale for at least 4 hours unplugged for acclimatization.
6
1
8
9
2
5
3
4
7
