22
USER MANUAL
__________________________________________________________________________________________________________________
15.3. Pieces counting function (PCS)
The function allows counting
identical pieces, e.g pills or buttons
included into weighed portion.
Measurement is performed in two
phases:
- first phase – calculating the mass of
single item basing on a sample
containing
defined
amount
of
pieces:
5, 10, 20, 50, 100, 200
or
500
pieces,
- second phase – counting pieces in
weighed portion.
The function has the following
options:
-
PCS OFF
– switch the function off
-
PCS on
– switch the function on
-
PCS ...
– recover last used unitary
mass,
-
PCS 5, 10, 20
, ... , 500 – amount of
pieces in a sample,
-
PCS SEt
– set any amount of pieces
in a sample,
-
PCS uM
– set unitary mass directly,
-
out
– leave menu without changes.
Comments:
1. It is recommended that mass of
single piece is greater than reading
unit and mass of sample used in
first phase is bigger than 100
reading units.
2. PCS Err message indicates that a
sample was not put on a pan or a
mass of single piece is less than one
reading unit (it is possible to count
pieces knowing that errors will be
bigger).
0.00 g
12.05 g
23.04 g
PCS
PCS oFF
PCS on
5
MENU
T
T
T
0 pcs
5
12
12 pc s
T
